- Beschreibung
Conversion kit IM787 to IM775 (competition version) |
This is a conversion kit to convert your Impaction 787 mechanic to the Impaction 775 competition version.
The Quest Impaction 775 Competition !
This kit combines the conservative features like push-pull linkage and 2-stage main gear with belt drive that have proven
their advantage in thousands of competitions, with the new very stiff main frame based on doubled carbon plates with
a 35mm tail boom that requires no support tubes!
Also the center of gravity could be now adjusted very easy if you want to use a fuselage.
All layout was designed to get as light as possible in the area of the tail rotor and bring all necessary weight
to the front tip of the mechanic. Stiffness and battery layout have now the best position to eliminate
wobble, hunting and shaking to its maximum.
- precise gold anodized aluminum parts
- CNC milled carbon frames and parts
- 12mm hardened main shaft
- spiral shaped main gear with belt drive for low noise and superb flight sound
- Push-Pull linkage for the swash plate for minimum free play and servo gear protection
- 3-blade tail rotor
- battery quick release system - battery exchange with in seconds (also at fuselage use)
Technical data: |
- main rotor diameter: ~1730mm
- tail rotor diameter: ~269mm
- overall length : 1480mm
- overall high : 380mm
- flight weight with fuselage 5900g
- Standard gear ratio : 10.53:1 (1:5.06)
- Motor / ESC: Kontronik Pyro 750/800 (500kV) + Kontronik Kosmik 160/200
- Battery: 2x 6S 5800mAh
Conversion kit contains: |
- precise milled and anodized aluminum parts
- CNC milled carbon parts for Frame with 4mm and 2mm strength
- 3-blade tail rotor (IM775 Version)
- all belts, lever and new main mast
- This is a conversion kit! Fuselage, cabin, landing gear, tail fins and blades have to be bought separately!!!!!!!!!!